*
* ===[ PARAMETER'S FILE FOR LAMINAR FLOW IN A TUBE OF A PL FLUID]=======
*
===[ PROBLEM PARAMETRES ]===============================================
Length of large tube  [WIDTH]
0.8
Radius of large tube  [RADIUS]
0.005
Axial velocity at inlet of flow domain  [UIN]
3.428
===[ GRID AND GEOMETRY VARIABLES ]=======================================
Cylindrical coordinate system ?  [POLAR]
.TRUE.
Number of cells in X-direction  [NI]
40
Number of cells in Y-direction  [NJ]
40
Grid expansion factor in X-direction  [FEXPX]
1.05
Grid expansion factor in Y-direction  [FEXPY]
0.95
===[ TIME VARIABLES ]===================================================
Steady state flow ?  [STEADY]
.TRUE.
Number of time steps  [NT]
1
Time step size  [DT]
1.0
===[ DEPENDENT VARIABLES ]==============================================
Solve for U-equation ?  [INCALU]
.TRUE.
Solve for V-equation ?  [INCALV]
.TRUE.
Solve for PP-equation ?  [INCALP]
.TRUE.
Solve for T-equation ?  [INCALT]
.FALSE.
===[ THERMO-PHYSICAL PROPERTIES ]=======================================
Material Density  [DENSIT]
1000.
Consistency Index  [CI]
0.30636
Power Law Index  [PLI]
0.716
Laminar Prandtl number  [PRANDT]
1.0
Update thermo-physical properties ?  [INPRO]
.TRUE.
===[ ITERATION PARAMETERS ]=============================================
Maximum number of iterations per time step  [MAXIT]
400
Maximum acceptable value of residuals  [SORMAX]
0.0005
Normalization quantity for mass residual  [SNORM]
1.0
Normalization quantity for U-momentum residual  [SNORU]
1.0
Normalization quantity for V-momentum residual  [SNORV]
1.0
Normalization quantity for T-equation residual  [SNORT]
1.0
Under-relaxation factor for U-equation  [URFU]
0.6
Under-relaxation factor for V-equation  [URFV]
0.6
Under-relaxation factor for PP-equation  [URFP]
0.1
Under-relaxation factor for T-equation  [URFT]
1.0
Under-relaxation factor for VISCOSITY(GREEK ETA)-equation  [URFH]
0.7
===[ COORDINATES OF FIXED PRESSURE POINT ]=============================
I-index of location where pressure is fixed  [IPREF]
2
J-index of location where pressure is fixed  [JPREF]
2
===[ EQUATION SOLVER PARAMETERS ]======================================
Solver selection for U-equation  [ISLVU]
1
Solver selection for V-equation  [ISLVV]
1
Solver selection for PP-equation  [ISLVP]
1
Solver selection for T-equation  [ISLVT]
1
Constant used by SIM solver  [ALPHA]
0.8
Number of application of line iteration for U-equation  [LITERU]
1
Number of application of line iteration for V-equation  [LITERV]
1
Number of application of line iteration for PP-equation  [LITERP]
4
Number of application of line iteration for T-equation  [LITERT]
1
Maximum allowable value of solver residual sums for U  [SORU]
1.0E-6
Maximum allowable value of solver residual sums for V  [SORV]
1.0E-6
Maximum allowable value of solver residual sums for PP  [SORP]
1.0E-6
Maximum allowable value of solver residual sums for T  [SORT]
1.0E-6
===[ INPUT-OUTPUT PARAMETERS ]==========================================
I-index of monitoring location  [IMON]
3
J-index of monitoring location  [JMON]
38
Iteration Index for field printout  [NITPRI]
1000
Time Index for field printout  [NSTPRI]
1
Read IN initial field  [INREAD]
.false.
Name of restart file  [RSTFIL]
RESTART.BIN
Copy OUT FINAL field  [INWRIT]
.TRUE.
Name of SAVE file  [SAVFIL]
RESTART.BIN
Name of main output file  [OUTFIL]
RESULT.DAT