*
* ===[ PARAMETER'S FILE FOR TFLOW ; TRANSIENT 2D SEDIMENTATION-PART2 ]==
*
===[ PROBLEM PARAMETRES ]===============================================
Width of cavity  [WIDTH]
1.0
Height of cavity  [HEIGHT]
1.0
Angle of flow field against horizontal axis (degrees) [THETA]
-5.0
Volume fraction of FIRST phase
0.5
Gravity Constant [GRAV]
10.0
Interphase friction coefficient [FCOEF]
10.0
===[ GRID PARAMETERS ]==================================================
Cylindrical coordinate system ?  [POLAR]
.FALSE.
Number of cells in X-direction  [NI]
35
Number of cells in Y-direction  [NJ]
35
Grid expansion factor in X-direction  [FEXPX]
15.0
Grid expansion factor in Y-direction  [FEXPY]
15.0
===[ TIME PARAMETERS ]==================================================
Steady state flow ?  [STEADY]
.F.
Number of time steps  [NT]
50
Time step size  [DT]
0.1
===[ DEPENDENT VARIABLES ]==============================================
Solve for U-equations ?  [INCALU]
.T.
Solve for V-equations ?  [INCALV]
.T.
Solve for R-equations ?  [INCALR]
.T.
Solve for PP-equation ?  [INCALP]
.T.
Solve for T-equations ?  [INCALT]
.F.
===[ THERMO-PHYSICAL PROPERTIES ]=======================================
Material Density for both phases  [DENS1,DENS2]
1,1000
Laminar fluid viscosity for both phases  [VISC1,VISC2]
1E-5, 1E-3
Laminar Prandtl number  [PRAND1,PRAND2]
1.0,1.0
Update thermo-physical properties ?  [INPRO]
.FALSE.
===[ TERMINATION CRITERIA FOR ITERATIONS ]==============================
Maximum number of iterations per time step  [MAXIT]
150
Maximum acceptable value of residuals  [SORMAX]
5E-3
===[ UNDER-RELAXATION ]=================================================
Under-relaxation factor for U-equation  [URFU]
0.3
Under-relaxation factor for V-equation  [URFV]
0.3
Under-relaxation factor for R-equation  [URFR]
0.5
Under-relaxation factor for PP-equation  [URFP]
0.1
Under-relaxation factor for T-equation  [URFT]
1.0
===[ COORDINATES OF FIXED PRESSURE POINT ]=============================
I-index of location where pressure is fixed  [IPREF]
2
J-index of location where pressure is fixed  [JPREF]
2
===[ EQUATION SOLVER SELECTION ]========================================
Solver selection for U-equations [ISLVU]
2
Solver selection for V-equations [ISLVV]
2
Solver selection for PP-equation [ISLVP]
2
Solver selection for R-equations [ISLVP]
2
Solver selection for T-equations [ISLVT]
1
Constant used by SIM solver  [ALPHA]
0.8
===[ TERMINATION CRITERIA FOR EQUATION SOLVER ]=========================
Number of application of line iteration for U-equation  [LITERU]
2
Number of application of line iteration for V-equation  [LITERV]
2
Number of application of line iteration for PP-equation  [LITERP]
4
Number of application of line iteration for R-equation  [LITERR]
2
Number of application of line iteration for T-equation  [LITERT]
2
===[ INPUT-OUTPUT PARAMETERS ]==========================================
I-index of monitoring location  [IMON]
6
J-index of monitoring location  [JMON]
6
Iteration Index for residual printout  [NITRES]
5
Iteration Index for field printout  [NITPRI]
1000
Time Index for field printout  [NSTPRI]
10
Read IN initial field  [INREAD]
.F.
Name of restart file  [RSTFIL]
RESTART.
Copy OUT FINAL field  [INWRIT]
.T.
Name of SAVE file  [SAVFIL]
RESTART.
Name of main output file  [OUTFIL]
RUN.OUT
Generate velocity field file ?  [INPLOT]
.T.
Generate pressure field file ?  [INPRES]
.T.
Generate volume fraction field file ?  [INVFRC]
.T.
Generate temperature field file ?  [INTEMP]
.F.
===[ INTERPHASE TRACKING PARAMETERS ]===================================
Create interphase tracking reports ? [INTRAC]
.T.
Limit for zero volume fraction (or interphase tracking) [ZEROLIM]
0.01