*
* ===[ PARAMETER'S FILE FOR TFLOW ; TRANSIENT T-PASS ]==
*
===[ PROBLEM PARAMETRES ]===============================================
Height of cavity, Angle of inclination against horiz. [HEIGHT,THETA]
0.025d0, 0d0
Gap length of liquid water, and two-phase exit (% of sides) [PINW,POUT]
25,25
Number of channels [NCH]
5
Lengths of each channel ("NCH" numbers) [WCH]
5*0.01
Gap length of air entry (% of sides) ("NCH" numbers) [PINA]
5*25
Internal (right) wall height for each channel ("NCH"-1 numbers) [HCH]
4*0.01
Inlet velocity of liquid water and air [UINW, UINA]
0.1,0.1
Initial volume fraction of liquid phase in cavity [R1INIT]
0.001
Interphase friction coefficient [FCOEF]
100d0
===[ GRID PARAMETERS ]==================================================
Number of cells in X- and Y- direction  [NI,NJ]
102, 32
===[ TIME PARAMETERS ]==================================================
Steady state flow ?  [STEADY]
.F.
Number of time steps  [NT]
500
Time step size  [DT]
0.01
===[ DEPENDENT VARIABLES ]==============================================
Solve for U- and P- equations ?  [INCALU]
.T.
Solve for R-equations ?  [INCALR]
.T.
===[ THERMO-PHYSICAL PROPERTIES ]=======================================
Material Density for both phases  [RHO1,RHO2]
1D3, 1D0
Laminar fluid viscosity for both phases  [VISC1,VISC2]
1D-3, 1d-5
===[ TERMINATION CRITERIA FOR ITERATIONS ]==============================
Maximum number of iterations per time step  [MAXIT]
500
Maximum acceptable value of residuals  [SORMAX]
5.D-05
===[ UNDER-RELAXATION ]=================================================
Under-relaxation factor for U- V- and P- equations  [URFU,URFV,URFP] 
0.2D0, 0.2D0, 0.075D0
Under-relaxation factor for R-equation  [URFR]
0.9D0
False time step for U- and V- equations? [FALSDTU, FALSDTV]
.F., .F.
False time step size for U- and V- equations [DTFALSU, DTFALSV]
0.1D0, 0.1D0
Under-relaxation factor for DU- and DV- correction  [URFDU, URFDV]
1.0D0, 1.0d0
===[ COORDINATES OF FIXED PRESSURE POINT ]=============================
I,J index of location where pressure is fixed  [IPREF,JPREF]
2,2
===[ EQUATION SOLVER SELECTION ]========================================
Solver selection for U-, V- and P- equations [ISLVU,ISLVV,ISLVP]
2,2,2
Solver selection for R-equations [ISLVP]
2
Constant used by SIM solver  [ALPHA]
0.8D0
Weight terms of PP-equation with phase Density? [WEIGHT]
.t.
===[ TERMINATION CRITERIA FOR EQUATION SOLVER ]=========================
Number of line iterations for U-, V- and P- equations [LITERU,LITERV,LITERP]
3, 3, 3
Number of application of line iteration for R-equation  [LITERR]
2
===[ INPUT-OUTPUT PARAMETERS ]==========================================
I,J index of monitoring location  [IMON,JMON]
5,2
Iteration Index for residual and field printout  [NITRES,NITPRI]
100, 10000
Time Index for field printout  [NSTPRI]
1
Read IN initial field  [INREAD]
.T.
Name of restart file  [RSTFIL]
RESTART.
Copy OUT FINAL field  [INWRIT]
.T.
Name of SAVE file  [SAVFIL]
RESTART.
Name of main output file  [OUTFIL]
RUN.OUT